sunday53 5 Report post Posted December 12, 2014 hello. i just bought a second hand evga mb [as above]. built up the system as such. i didn't put any devices attached to mb, only the grafix card[test purposes]. this system uses a passive heatsink, no fan on the cpu cooler. the build went reaonably well. however, when attempts are made to boot[many of these-loop, loop ], nada. the fan on grafix card[a single] does a song 'n dance but, can't even get to post. after about a sec, the sys shuts down. I have tried alot of things to sort this with no joy, not close even---CLR CMOS, changed polarity of fr. panel[case] cable/wire interface connectors, changed out memory, the psu is sufficiently powered to manage the board. the cables are all seated and connected correctly[24 pin, 8 pin and additional molex[4 pin for more grafix power]. the fact that the board starts up as such is keeping me interested but, not much else is in this case . am getting to the place where i want to get rid of it now...nearly have enuff. ...it keeps doing same thing, jumps into it's boot but, fails to take off. ideas, please :( ( Share this post Link to post Share on other sites
eatmyshorts 201 Report post Posted December 13, 2014 First of all...let's have all the specs of the pc..including what OS you're using 1 Share this post Link to post Share on other sites
sunday53 5 Report post Posted December 15, 2014 argh...no worries bart. am sitting this one out onto and into the bin. that's best place for it. i have tried me damndest/harfest/most awkwardest but the thing just wouldn't get passed go...and I shall do no more. to 'bart' thanks. the thing got to me. Share this post Link to post Share on other sites