suca41 1 Report post Posted March 26, 2012 I have embedded Atheros AR5007EG Wireless Network Adapter and I'm install new windows 7 ultimate x32 and driver for Wireless and then I bought TP-LINK TL-WN422G. How to fix Atheros AR007EG? And sorry for bad English. Share this post Link to post Share on other sites
fennfam3 182 Report post Posted March 26, 2012 Top of my head I am thinking that you should be able to click on the "Radio Puls" and disable it. Then click on the Atheros AR5007EG and enable it. When you click on one of them you will see options right above it that will give you the option to either enable or diable. Just looking at your pic. it appears that the LAN and AR5007EG are not enabled. Let me know Share this post Link to post Share on other sites
odiebugs 0 Report post Posted March 30, 2012 There is nothing to fix, you have onboard wireless (atheros) but you want to use the TP, RT click on atheros and disable it, and RT click on TP and enable, its shouldn't matter wheather you have your LAN enabled or disabled. Its should come with a software program, which should allow you to pick which networks and how you connect. You can have 5 wireless hardwares installed, the drivers are installed for each and have nothing to do with eachother. Share this post Link to post Share on other sites
fennfam3 182 Report post Posted March 30, 2012 kinda what I said odiebugs. Share this post Link to post Share on other sites
odiebugs 0 Report post Posted March 30, 2012 kinda what I said odiebugs. My bad, though the Atheros was still showing and couldn't connect, but they just wanted to use Atheros again. Share this post Link to post Share on other sites
