Jump to content

Vignesh Nallamad

Members
 View Profile  See their activity

  • Content Count

    274

  • Donations

    $0.00 

  • Joined

  • Last visited

  • Days Won

    9

Posts posted by Vignesh Nallamad

  2. Posted · Report reply

    may be its due to failure of a component to start (it may be even because of accumulation of dust)... but it will be a very minor problem and it can be fixed easily by a professional... (as we cannot see it personally we cannot suggest anything)...

  4. Posted · Report reply

    as rapidshare is free uploaders dont prefer it as they get no reward... but there are enough files on RS on this site... not just this forum but other forums too have very few RS links... also files will be deleted very soon if it violates any copyright... i prefer mediafire as its the best...

    • Like 1

  9. Posted · Report reply

    it is a clearly a problem with the driver... u get this error when the connected device fails to send an interrupt to the processor when you access it... try to update the driver... if u hav plugged in any new device then try to remove it then install its driver and then connect it... if u hav not connected it thn check if u hav updated system recently...

  10. Posted · Report reply

    The STOP 0x00000008 error may also be abbreviated as STOP 0x8 but the full STOP code will always be what's displayed on the blue screen STOP message.

     

    If Windows is able to start after the STOP 0x8 error, you may be prompted with a Windows has recovered from an unexpected shutdown message that shows:

     

    Problem Event Name: BlueScreen

    BCCode: 8

     

    Cause of STOP 0x00000008 Errors

     

    STOP 0x00000008 errors are likely caused by hardware or device driver issues.

    If STOP 0x00000008 isn't the exact STOP code you're seeing or IRQL_NOT_DISPATCH_LEVEL isn't the exact message, please check my Complete List of STOP Error Codes and reference the troubleshooting information for the STOP message that you are seeing.

     

     

    Note: The STOP 0x00000008 STOP code is rare so there's little troubleshooting information available that's specific to the error.

     

    However, since most STOP errors have similar causes, there are some basic troubleshooting steps to help fix STOP 0x00000008 issues:

     

    Restart your computer if you haven't already done so.

     

    The STOP 0x00000008 blue screen error may not occur again after rebooting.

     

    Perform basic STOP error troubleshooting. These extensive troubleshooting steps aren't specific to the STOP 0x00000008 error but since most STOP errors are so similar, they should help resolve it.

    • Like 1

  21. Posted · Report reply

    u can restart ur modem and u wil get a new ip if ur service provider is using dynamic ip...

    also using dos prompt u can set ur ip and u must use the following command

     

    SET IP=xxx.xxx.xxx.xxx

    SET GATEWAY=xxx.xxx.xxx.xxx

    SET SUBNETMASK=xxx.xxx.xxx.xxx

    SET DNS=xxx.xxx.xxx.xxx

     

    but this may sometimes disconnect u from network...

  23. Posted · Report reply

    for your question its difficult to answer... the only way to do it is by logging into it anonymously using any source code that is developed specially for your pc that will stop streaming ur video... there cannot be a general method to do it...

     

    u can use super hide my ip instead of mask my ip... here is the link...

     

    http://www.superhideip.com/download.html

×