Jump to content

fennfam3

Friends
 View Profile  See their activity

  • Content Count

    213

  • Donations

    $0.00 

  • Joined

  • Last visited

  • Days Won

    9

Posts posted by fennfam3

  8. Posted · Report reply

    As @daytrader suggest, check and make sure keys are not sticking. Also as @grandad suggests, check region.

    You need to install the SP1 that is available for win7 regardless.

     

    To check and configure keyboard regions do the following:

     

    Open control Panel and select Region and Language

    keyboard1.png

     

    Next, Select Keybards and Languages tab then click on the Change Keyboards button

    keyboard2.png

     

    Then see if the laguage is English and if not then just click on the Add button to add English. Once English is added then you can delete the other language(s) if needed. If you choose to keep more than one language then you will need to go to the Advanced Key Settings tab to set up the Language Switching hot keys.

    keyboard3.png

     

    If all of this does not work then I would uninstall keyboard drivers and then reboot to reinstall them.

    • Like 1

  10. Posted · Report reply

    shovanadhikary,

    Your dell documents should give you an idea but for best results you should actually unplug the laptop from the power supply once it is fully charged. Then once it gets to approx 10 % battery life then plug back in and recharge to full charge then repeat process. It is harder on a battery when you leave the laptop plugged in to power supply all the time and don't let the battery discharge and then recharge. If you plan on leaving the laptop plugged in all the time then either remove the battery once fully charged or see if your dell has a small program that allows the battery to stop charging while it is plugged in. It would do this untill next reboot. If you right click on the battery meter it should give you this option to stop charging until next reboot.

    One more thing.....never discharge the battery completely. this is very hard on a battery also. These batterys are not like the older ones that had a memory.

    • Like 2

  13. Posted · Report reply

    The Basics

     

    To really explain port forwarding, you first need to understand a little more about what your router does. Your internet service provider assigns one IP address to your internet connection. All computers on the internet need a unique IP address, but you have multiple computers in your house and only one address. So how does this work?

    If you know what it is and just want to know how to do it: http://portforward.com/ has a howtos with screenshots for literally hundreds of different routers. The documentation is there hidden behind an ad-page for their automatic portconfig tool. (Just click around a bit an you'll find it)

     

    NAT - What is it? Why do we use it?

     

    Your home router has a function called Network Address Translation, or NAT, built-in. Inside your network, computers have addresses like 192.168.1.100. All addresses in the 192.168.* range (or in the 10.*) range are "private" or "reserved" addresses. These addresses are officially assigned by IANA to be used inside of private networks. You router automatically assigns such an address to each computer connected, via DHCP. These addresses are how computers in your network communicate with the router and with each other.

    Your router has a separate network interface that connects it to the internet. This interface has a much different address, one assigned by your ISP. This is the one address that I mentioned before, and your router uses it to communicate with other computers on the internet. Computers inside of your network have non-routable private IP addresses, meaning that if they send packets directly to the internet the packets will automatically be dropped (packets with private addresses are not allowed to traverse the internet for stability reasons), but your router has a routable address. Network Address Translation, as its name suggests, translates between these two kinds of addresses, allowing the multiple computers inside of your network to appear to the internet as one computer with one address.

     

    The Details

     

    Although this might sound complicated, it's actually pretty simple how your router does it. Every time a computer inside your network wants to connect to a computer on the internet, it sends the connection request to the router (it knows to send it to the router because its Default Gateway parameter is set to the router's address). The router than takes that connection request (a "SYN request" in TCP/IP) and changes the source address (the "reply-to" or return address) and changes it from the private IP of the computer to the public IP of the router, so that the response will be sent to the router. It then takes note in a database (called the NAT table) that the connection was initiated, so that it remembers it later.

    When the response comes back from the remote computer (a "SYN-ACK"), the router looks in its NAT table and sees that a connection to that host on that port was previously initiated by a private computer on your network, and it changes the destination address to the private address of the computer and forwards it inside your network. In this way, packets can continue to transit back and forth between networks, with the router transparently changing the addresses so that it works. When the connection is terminated, the router just removes it from the NAT table.

     

    Or think of it this way

     

    This might be a little easier to visualize with a metaphor - let's say you're a freight forwarder in the US working with Chinese clients. They need to send packages to many customers in the US, but it's easier for customs/paperwork reasons to only send packages to one place. So, a package comes to you from China (the private network, in this example) with an actual destination somewhere in the US (the internet). You change the address label on the box to the US (public) address, and you change the return address to your own public address (since it can't be returned straight to china without inconveniencing the customer) and hand it to the postal service. If the customer returns the product, it comes to you. You look it up in your records and see what company in China it came from, and change the destination to that company (its private address) and the return address to your private address, so that they can send back a replacement via you.

    This works great, but there's a bit of a problem. What if a customer needs to send something to the company, let's say a money order in payment for something. Or, lets say that a computer on the internet initiates a connection with the router (a SYN request), say to a webserver that is in the network. The letter/packet only has the router's public address on it, so the router actually doesn't know where to send it! it could be destined for any of the computers on the private network, or for none of them. You might have experienced this problem when you call someone's home phone - when they call you it's no problem, but when you call them there's no way for them to know who's the call for, so the wrong person might answer. While it's easy enough for humans to sort this out, it's a lot tricker for computers, because not every computer on your network knows all the other computers.

     

    And finally we get to Port Forwarding

     

    Port Forwarding is how we fix this problem: it's a way to tell your router what computer inside the network incoming connections should be directed to. We have three different ways we can do this:

    • Faux-DMZ: a lot of routers have a feature called DMZ. This stands for Demilitarized Zone, which is a kind of network security configuration. The DMZ on home routers is often referred to as faux-DMZ because it lacks the features of an actual DMZ. What it does do is the simplest kind of incoming connection handling: all incoming connection requests will be sent to one specified inside your network. It's dead simple - you type an IP address in to your routers configuration, and all incoming connections go there. This doesn't always work, though, because you might have multiple computers that need to accept incoming connections. For that, we have...
    • Port forwarding: All network connection requests include a "port". The port is just a number, and its part of how a computer knows what the packet is. IANA has specified that Port 80 is used for HTTP. This means that an incoming packet that says port number 80 must be a request intended for a web server. Port forwarding on your router allows you to enter a port number (or possibly a range or combination of numbers, depending on the router), and an IP address. All incoming connections with a matching port number will be forwarded to the internal computer with that address.
    • UPnP port forwards: UPnP forwarding works the exact same way as port forwarding, but instead of you setting it up, software on a computer inside the network automatically sets the router to forward traffic on a given port to it.

    portq.png

     

    An example

     

    Let's look at a usage example. A lot of multi-player video games (as an example, Counter Strike) allow you to run a game server on your computer that other people can connect to in order to play with you. Your computer doesn't know all the people that want to play, so it' can't connect to them - instead, they have to send new connection requests to your computer from the internet.

    If you didn't have anything set up on the router, it would receive these connection requests but it wouldn't know which computer inside the network had the game server, so it would just ignore them (or, more specifically, it would send back a packet indicating that it can't connect). Luckily, you know the port number that will be on connection requests for the game server. So, on the router, you set a port forward with the port number that the game server expects (for example, 27015) and the IP address of the computer with the game server (for example, 192.168.1.105).

    The router will know to forward the incoming connection requests to 192.168.1.105 inside the network, and computers outside will be able to connect in.

    Another example would be a local network with two machines, where the second one with the IP 192.168.1.10 hosts a website using Apache. Therefore the router should forward incoming port 80 requests to this machine. Using port forwarding, both machines can be run in the same network at the same time.

    Video games are perhaps the most common place everyday users will encounter port forwarding, although most modern games use UPnP so that you don't have to do this manually (instead, it's fully automatic). You'll need to do this whenever you want to be able to connect directly to something in your network though (rather than through some intermediary on the internet). This might include running your own web server or connecting via Remote Desktop Protocol to one of your computers.

    A note on security

     

    One of the nice things about NAT is that it provides some effort-free, built-in security. A lot of people wander the internet looking for machines that are vulnerable... and they do this by attempting to open connections with various ports. These are incoming connections, so, as discussed above, the router will drop them. This means that in a NAT configuration, only the router itself is vulnerable to attacks involving incoming connections. This is a good thing, because the router is much simpler (and thus less likely to be vulnerable) than a computer running a full operating system with a lot of software. You should keep in mind, then, that by DMZing a computer inside your network (setting it as the DMZ destination) you lose that layer of security for that computer: it is now completely open to incoming connections from the internet, so you need to secure it as if it was directly connected. Of course, any time you forward a port, the computer at the receiving end becomes vulnerable on that specific port. So make sure you run up-to-date software that is well configured.

    • Like 1

  15. Posted · Report reply

    dnapzter,

    This is a tough one and not sure what game you are refering to and are u wanting to setup a game on a server or just networking it as shared.

    if I am not mistaken, most games will not allow shared without having installed on each pc or at least part of the game. If you are looking to setup as a multiplayer then of couse the game itself has to be a multiplayer type game and setup on a server. Even at that, some require seperate installs on each pc. Now I do have a game that did not require an install and I am able to run it over a network. Bad thing is, I can't remember who I downloaded it from so I cant tell you where to get it.

     

    What may help is if you can tell us what game you are wanting to share and we can look into if further.

  16. Posted · Report reply

    Hello ian and welcome to CW. I like a person who is not afraid to tweak their computer(s) but as kenner stated, we do have a great tech team so don't be afraid to ask any questions. We are here to help/guide.

     

    I also want to say that the whole CW staff is great and I guarantee you will not find a better staff anywhere. I have been to many, many forums and ultimately realized that CW is the only place to be. You will find out that we are not just a forum but a family.

     

    Once again, welcome to Cyberwarez.info

     

     

    fennfam3

    • Like 2

  18. Posted · Report reply

    dirtylow has now been reinstated as a mod so he should be good to go on editing his shouts. At the time dirtylow started this thread he did not have a mod status which was lost during the transistion CW made. As far as non-mods or non-vip's editing their own shouts, I agree that they should not be able to edit them.

     

    It is nice though to have the option to edit as I have done this in the past. I kinda look at the shout like texting....I get some really weird ones sometimes and feel like I am with the CIA, FBI and have to cipher the code to find out what the text really is. lol

    • Like 6

  25. Posted · Report reply

    This is a local band. I worked at the same place the drummer of this band did. He worked by day and played by night ( or should I say ROCKED by night) Alsome ROCK band.

     

    Here are a few of videos. Hope you like. :D

    t4mx.pngt4m1.png

     

    http://www.youtube.com/watch?v=Bu9rMbarvR8&feature=youtu.be

     

    http://youtu.be/pywT7dzUUsE

     

    http://youtu.be/lC1mi-4wCSg

     

    Here is one of their websites if you want to check it out. You will have to scroll down to the comments and pause the rap song that plays if you want to listen to T4M songs.

     

    http://www.myspace.com/t4mrocks

    • Like 5
×