Copy paste problem

[Half Monk 697]

when i copy some file and paste into folder it nerve past .

i think the file copy within 2 sec and after two second.i seen file is not copy.sry for bad english.

[daytrader 203]

do you use mouse for this or Ctrl + C and V

[fennfam3 182]

dj,

What OS are you using? How much memory do you have?

When did you notice this c/p issue start happening?

have you installed any new software during this time?

 

Please give us as much info as possible to help us better serve you.

[Vignesh Nallamad 209]

when u copy files..

Keep both the source folder and destination folder open and next to each othr and then copy....

[dirtylow 188]

This happens 2 me sometimes, but is usually & most easily solved with a re-boot. Have U re-booted & still have this problem?

[Tech 425 3,942]

I use "Ctrl + C and V" as a Cat got my Mouse Really use the keyboard command it's better

[Half Monk 697]

Yes. i reboot . and i also have problem the keyboard cmd.it's also have this .

my pc config:-Asus M4N68 LM v2

AMD phenom x2 555 Processor (2CPU) black edition (3.21ghz)

4 gb DDR 3 Ram

1 Gb ATI Readon 4300/4500 Series

660 Gb Hardsik

LG Monitor Fltron E2040T (16.9)

WIndows 7 (64) bit.

I got this problem to 6 months.i read somewhere install AVG antivirus and scan but nothing happen.

i got this problem thorugh my friend's pendrive.

[Tech 425 3,942]

Boot into safe mode (do this of a cold boot - disconnect all power for 5-10 minites) - (when you start you computer right after bios screen start pressing F8) then goto windows safe mode with networking support.

 

Then start browser and type into Google "Online Virus Scan" I would first run Eset online scan then run a few more. Make sure you run from good companys.

 

After you fix your system I would get a better anti virus scanner and also add SpyBot.

 

Hope this helps and also scan everything as I don't fully trust ondemand scanners.

[Half Monk 697]

Thanks...................

[dirtylow 188]

I don't have a solution just yet, I had checked back & U didn't comment @ the time so I thought this was solved. Anyway that has happened 2 me also. & I think I just restored a BAK. Thats my thing I hate PC problems so I always make a BAK. Should a problem arise I might, & I mean might try 2 trouble shoot it. But I generally just restore the BAK because it only takes 20 minutes to do. I could setup the restore make a cup of coffee talk 2 the family or a friend & when I come back 2 the PC its all fixed nice-nice 4 me. I cant hunt down a solution that quickly & apply it so I don't even try. Plus sometimes the fix doesn't even work, so by trying it I just made things worse & then have 2 undo it.

 

Now I am not speaking about System Restore I don't use it, but I would do it on some1 elses PC though. lolz...

I am speaking about Ghost or Acronis. I haven't heard any bad things about Win Restore image service,but I haven't looked in2 it either.

 

Anyway if U R still having this problem I would start with the drivers for the inputDevises check-em out. Maybe try different input devises. Also R they cordless maybe batteries. But start by checking the drivers & maybe update them could be corrupt.

[Half Monk 697]

I do Whatever u Say tech425. But NOthing happen.

[dirtylow 188]

There are 57,000,000 answers to this same "?"

How much time do U have 2 solve this. I don't know about U but I don't want 2 try each 1. Did U add a program just before this problem like i.e. "Advanced System Care _ from IOBIT software" if so that is the culprit. U have 2 go in2 its config 2 tell it 2 ignore the clipboard cache when it does it's memory management tasks. Otherwise it kills copy/paste functionality totally.

 

 

 

 

The above is the hard way going through each solution 1 by 1. In the end non of them might not work. Then what? So why not work backward like I suggested B4?

 

I don't have a solution just yet, I had checked back & U didn't comment @ the time so I thought this was solved. Anyway that has happened 2 me also. & I think I just restored a BAK. Thats my thing I hate PC problems so I always make a BAK. Should a problem arise I might, & I mean might try 2 trouble shoot it. But I generally just restore the BAK because it only takes 20 minutes to do. I could setup the restore make a cup of coffee talk 2 the family or a friend & when I come back 2 the PC its all fixed nice-nice 4 me. I cant hunt down a solution that quickly & apply it so I don't even try. Plus sometimes the fix doesn't even work, so by trying it I just made things worse & then have 2 undo it.

 

Now I am not speaking about System Restore I don't use it, but I would do it on some1 elses PC though. lolz...

I am speaking about Ghost or Acronis. I haven't heard any bad things about Win Restore image service,but I haven't looked in2 it either.

 

Anyway if U R still having this problem I would start with the drivers for the inputDevises check-em out. Maybe try different input devises. Also R they cordless maybe batteries. But start by checking the drivers & maybe update them could be corrupt.

 

Ok so U tried what 425 said, but did U try what I said B4?

• I told U that a Bak is the way 2 go.
  
• Check & update the drivers 4 UR input devices.
  
• Or 2 try different input devices.
  
• Try booting in safe mode does the problem persist?
  

 

Why don't / didn't U take my advise B4.

U could have fixed this already.

 

Even if U don't have a Bak if U do a clean install of Win_ on another HDD or partition & U still have the problem then U will know that UR Hardware [MoBo] is failing. U could be living on borrowed time & don't even know it. I don't care if UR gear is new. New stuff fails too. If that is the case U should find out sooner rather than later. While it is under warranty. If its older gear & not under warranty then U still new 2 know ASAP so U can find UR next rig & put it together or buy it what ever U choose do.

 

Don't chase mystery bugs that U may or may not have. Fix the problem. 1st eliminate that possibility of hardware failure. Then decide do U want to chase down bugs or rebuild. I know I have 90 programs installed & from previous build I know that it will take me about 8Hrs to manually install & configure them. If UR really sharp U can automate this & do it unattended. I am not that sharp so I make Baks. That is my automation. If I have a problem right now I can restore my Bak & be up & running in 20/30 minutes. That's is with all 3 of my booting partition [8,7, & XP] & all of the 60/80/90 programs, & updates each retrospectively intact along with my custom settings.

 

Listen if U have been running that build 4 more that 2 years U should be making plans to reformat anyway. This time when U do so do it smart.

• Only install what U want/need.
  
• Stay off the WWW as much as possible while building.
  
• Make some Baks in step while U build.
  

Next time U have this or any other problem that solution will B easy. Restore UR Bak. Then if the problem persists U can trouble shoot from there.

[Half Monk 697]

I Think It Caused By "Advanced System Care _ from IOBIT" u Say "so that is the culprit" SO How TO Do that. and u say why u don't take my advice. i don't have engough space to make backup. i have 660 gb hard disk.Free space only 79.02.

 

UR Word:-[] Is mine

• I told U that a Bak is the way 2 go. [i Said]
  
• Check & update the drivers 4 UR input devices. [it's All Updated]
  
• Or 2 try different input devices.[Not Possible]
  
• Try booting in safe mode does the problem persist? [done i got same]
  

u say reFormat Ur Pc .i Format my pc in minmum 3 month.My All hardware i buyed 5-5-2011.

 

So Tell Me How To deal with "Advance windows care" it's good for me but not for my pc..

Thanks For Reply..

[Vignesh Nallamad 209]

clipboard cache is disabled i think so u try using secondary app like teracopy to do the job...

[dirtylow 188]

U have 2 go in2 its config 2 tell it 2 ignore the clipboard cache when it does it's memory management tasks. "Otherwise it kills copy/paste functionality totally".

1. Open the app.
    
   
2. Click on "ToolBox"
   

1. Then click on "Optimize"
    
   
2. Click on "SmartRam"
    
   
3. Click on "Settings"
    
   
4. Lastly Un-check "Clean ClipBoard"
   

Thats it U should B done, & now B able 2 copy & paste again .

Enjoy,

dirtylow

[Half Monk 697]

ya It's Done.Thanks A Ton. :cwrocks: :cwrocks: